Alfra 01471 Split Hole Puncher TriCut+® 28.3mm

Alfra 01471 Split Hole Puncher TriCut+® 28.3mm

Prod No: 01471

Alfra Range: TriCut+®

Tool Type: Hole Puncher TriCut+® for Sheet Steel (S235) & Stainless Steel (VA)

Diameter: 28.3mm

Includes: Draw bolt with Ball Bearing

Note: Other sizes available here

Description

The big plus of this holepuncher made by Alfra is the outstanding performance on stainless steel – for example for punch-outs in control cabinets or for production facitilies in the food industry.

The waste piece is cut into three pieces. That’s why it doesn’t tilt in the die. The Tricut+ can punch holes into stainless steel in material thickness' up to 2.5 mm (19.0 mm ; ¾“ screw or draw bolt)or on stainless steel in thickness' up to 2,0 mm (11.1 mm screw or draw bolt).

Usable up to a material thickness of:

• 2.5 mm stainless steel with 3/4" (19.0 mm) screw or draw bolt

• 2.0 mm stainless steel with 7/16" (11.1 mm) screw or draw bolt

Features

• With 3-fold split
• With UNF fine thread
• With 4 crosshair markings for simple central alignment

Notes

The max. material thickness for which a hole puncher can be used always depends on the screw and draw bolts used.